Inlet separator
The use of inlet separators is necessary in every vacuum circuit to separate the liquid from the air. This will allow to the vacuum pump to work just with the liquid ring flow, being able to achieve a closed liquid ring circuit with considerable energy savings. In addition, we will extend the service life of the vacuum pump or compressor using a precise flow of recommended liquid ring.
High efficieny inlet separators made by SAFEM improves the performance of the vacuum pump. Air and liquid comming from the machine, with possible particules or fibers, are separated allowing to the vacuum pump to work only with the liquid ring at appropriate flow and preserving the wear inside the pump.
SAFEM inlet separators ensure efficient air-water separation taking into account the suction flow and the vacuum applied at the suction point.
PNEUMATIC INLET SEPARATOR
It is an inlet separator regulated by electro-pneumatic valves actuated by a PLC that controls the opening and closing of the valves following a specif cycle. The liquid resulting from the separation is collected in a tank and through a centrifugal pump, send it back to the circuit.
GRAVIMETRIC SEPARATOR
Its use is limited to places wher they have the minimum height that exceeds the vacuum with which it works. There are two types: those used in the wet table and those normally installed in the felt.
Thanks to our background and the quality of our products, SAFEM offer to the companies the best accessories for liquid ring vacuum pumps and liquid ring compressors.
Our products are manufactured to ensure high reliability. All products follow a series of critical tests to be sure of their quality and performance that will give the best results and proper fonctioning.









